Dynaudio Focus loudspeakers Manuale Utente

The Focus range consists of classic bass reflex loudspeaker designs with no unusual or 
extraordinary positioning demands. Every room will still have its own particular sound 
characteristics. All rooms are shaped and decorated differently, and therefore remain 
unique

 regarding options for positioning loudspeakers. The following steps are 

general suggestions that will make the correct positioning easier to achieve.

Following explanations refer to Fig. 3:

• The distance between each loudspeaker and your listening position should be the 

same (B). Try to achieve an isosceles triangle.

• The distance between the loudspeakers should be the same or better slightly less 

than the distance between each loudspeakers and your listening position (A, B).

• The closer the listening position is in relation to the loudspeakers, the closer the 

speakers can be positioned to each other

• As a starting point, it is recommended that the speakers be about 2 meters apart from 

each other for the best results (A).

• If the speakers are positioned too close to each other, the stereo image will not seem 

realistic; if that distance is too wide, the image may leave an acoustic hole in the 
middle.

• Paying attention to the image during listening tests will help dictate optimum 

placement during experimentation and set-up.

Direct sunlight or excessive brightness can affect the color of any natural wood veneer 
(the structural integrity of the cabinet will not be affected).
X To maintain the aesthetic quality of the Focus loudspeakers for the long term, placing 

such in very warm, very cold, or very humid environments should be avoided. 

<

www.fshifi.cn