Cambridge Audio 551R Manuale Utente

551R

azur

Cambridge Audio warrants this product to be free from defects in materials

and workmanship (subject to the terms set forth below). Cambridge Audio will

repair or replace (at Cambridge Audio's option) this product or any defective

parts in this product. Warranty periods may vary from country to country. If in

doubt consult your dealer and ensure that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio authorised

dealer from which you purchased this product. If your dealer is not equipped

to perform the repair of your Cambridge Audio product, it can be returned by

your dealer to Cambridge Audio or an authorised Cambridge Audio service

agent. You will need to ship this product in either its original packaging or

packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is

evidence that this product is within the warranty period, must be presented

to obtain warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been

altered or removed from this product or (b) this product was not purchased

from a Cambridge Audio authorised dealer. You may call Cambridge Audio or

your local country Cambridge Audio distributor to confirm that you have an

unaltered serial number and/or you purchased from a Cambridge Audio

authorised dealer.
This Warranty does not cover cosmetic damage or damage due to acts of

God, accident, misuse, abuse, negligence, commercial use, or modification

of, or to any part of, the product. This Warranty does not cover damage due

to improper operation, maintenance or installation, or attempted repair by

anyone other than Cambridge Audio or a Cambridge Audio dealer, or

authorised service agent which is authorised to do Cambridge Audio warranty

work. Any unauthorised repairs will void this Warranty. This Warranty does not

cover products sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE

THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO SHALL

NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT.

EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE

AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES

WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some countries and US states do not allow the exclusion or limitation of

incidental or consequential damages or implied warranties so the above

exclusions may not apply to you. This Warranty gives you specific legal rights,

and you may have other statutory rights, which vary from state to state or

country to country.
For any service, in or out of warranty, please contact your dealer.

Plug Fitting Instructions (UK Only)

The cord supplied with this appliance is factory fitted with a UK mains plug fitted

with a 5 amp fuse inside. If it is necessary to change the fuse, it is important that

a 5 amp one is used. If the plug needs to be changed because it is not suitable for

your socket, or becomes damaged, it should be cut off and an appropriate plug

fitted following the wiring instructions below. The plug must then be disposed of

safely, as insertion into a mains socket is likely to cause an electrical hazard.

Should it be necessary to fit a 3-pin BS mains plug to the power cord the wires

should be fitted as shown in this diagram. The colours of the wires in the mains

lead of this appliance may not correspond with the coloured markings identifying

the terminals in your plug. Connect them as follows:
The wire which is coloured BLUE must be

connected to the terminal which is marked

with the letter ‘N’ or coloured BLACK.
The wire which is coloured BROWN must be

connected to the terminal which is marked

with the letter ‘L’ or coloured RED.
The wire which is coloured GREEN/YELLOW

must be connected to the terminal which is

marked with the letter ‘E’ or coloured GREEN.
If your model does not have an earth wire, then disregard this instruction.
If a standard 13 amp (BS 1363) plug is used, a 5 amp fuse must be fitted, or if any

other type of plug is used a 5 amp fuse must be fitted, either in the plug or adaptor,

or on the distribution board.

ENGLISH

Limited warranty

Ventilation

IMPORTANT – The unit will become hot when in use. Do not stack multiple units

on top of each other. Do not place in an enclosed area such as a bookcase or in a

cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If this happens,

switch off immediately, disconnect from the mains supply and contact your dealer

for advice.

Positioning

Choose the installation location carefully. Avoid placing it in direct sunlight or

close to a source of heat. No naked flame sources, such as lighted candles,

should be placed on the unit. Also avoid locations subject to vibration and

excessive dust, cold or moisture. The unit can be used in a moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a sealed

area such as a bookcase or in a cabinet. Any space open at the back (such

as a dedicated equipment rack) is fine, however. Do not place the unit on an

unstable surface or shelf. The unit may fall, causing serious injury to a child

or adult as well as serious damage to the product. Do not place other

equipment on top of the unit.
Due to stray magnetic fields, turntables or CRT TVs should not be located

nearby due to possible interference.
Electronic audio components have a running in period of around a week (if

used several hours per day). This will allow the new components to settle

down and the sonic properties will improve over this time.

Power sources

The unit should be operated only from the type of power source indicated on

the marking label. If you are not sure of the type of power-supply to your

home, consult your product dealer or local power company.
This unit has been designed to be left in Standby mode when not in use as

this will increase the life of the unit (this is true with all electronic equipment).

To turn the unit off, switch off at the rear panel. If you do not intend to use

this unit for a long period of time, unplug it from the mains socket.

Overloading

Do not overload wall outlets or extension cords as this can result in a risk of

fire or electric shock. Overloaded AC outlets, extension cords, frayed power

cords, damaged or cracked wire insulation and broken plugs are dangerous.

They may result in a shock or fire hazard.
Be sure to insert each power cord securely. To prevent hum and noise, do not

bundle the interconnect leads with the power cord or speaker leads.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any

cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an

aerosol at or near the unit.

Battery disposal

Batteries may contain substances harmful to the environment. Please

dispose of any discharged batteries with due consideration and in

accordance with local environmental/electronic recycling guidelines.

Loudspeakers

Before making any connections to loudspeakers, make sure all power is

turned off and only use suitable interconnects.

Servicing

These units are not user serviceable. Never attempt to repair, disassemble or

reconstruct the unit if there seems to be a problem. A serious electric shock

could result if this precautionary measure is ignored. In the event of a

problem or failure, please contact your dealer.

IMPORTANT

If the unit is run at a very high level, a sensor will detect a temperature rise and

show "PROTECTION OVERLOAD" on the display. The unit will then go into Standby

mode. It cannot be switched on again until the temperature has fallen to a more

normal level.