Edirol UA-20 Manuale Utente
29
Español
Italiano
Français
Deutsch
English
Getting Connected and Installing Drivers (Windows)
■
Windows Me/98 users
1
With the UA-20 disconnected, start up Windows.
Disconnect all USB cables other than those for a USB
keyboard or USB mouse.
keyboard or USB mouse.
2
Exit all currently running software (applications).
Also, close any open windows. If you are using a virus
checker or similar software, be sure to exit this as well.
checker or similar software, be sure to exit this as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
computer.
4
Click the Windows
Start
button. From the menu that
appears, select
Run...
.
Open the
Run...
dialog box.
fig.05-13e_30
5
In the dialog box that
appears, input the
following into the
appears, input the
following into the
“Open”
field, and click
[OK]
.
D:\DRIVER\USB_ME98\SETUPINF.EXE
* The drive name
“D:”
may be different depending on your system.
Type the name of your CD-ROM drive.
fig.05-14e_30
6
Open the
SetupInf
dialog
box.
You are now ready to install
the driver.
the driver.
7
Set the UA-20’s
ADVANCE (mode select) switch
to the
ON
position.
If the UA-20 is already
connected to your computer
and a message of
connected to your computer
and a message of
“Add New
Hardware Wizard”
is
displayed, go to the CD-ROM
folder named
folder named
DRIVER\USB_ME98
, open the
file Readme_e.htm, and read
the
the
“Troubleshooting”
section entitled
“You
attempted to install using
the above procedure, but
were not able to.”
.
In this manual, the location of
folders and files is given in
terms of the file path, using
folders and files is given in
terms of the file path, using
\
as
the delimiter. For example,
USB_ME98\SETUPINF.EXE
indicates that the
SETUPINF.EXE
file is located
in the
USB_ME98
folder.