Panasonic KX-TG7622B Manuale Utente
Changing the handset name
Each handset can be given a
customized name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is “No”. If you
select “Yes” without entering any
handset name, “Handset 1” to
“Handset 6” is displayed.
customized name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is “No”. If you
select “Yes” without entering any
handset name, “Handset 1” to
“Handset 6” is displayed.
1
MMENUN#104
2
Enter the desired name (max. 10
characters; see the character table,
page 35).
R If not required, go to step 3.
characters; see the character table,
page 35).
R If not required, go to step 3.
3
MSAVEN
4
MbN: Select the desired setting. a
MSELECTN 2 times
MSELECTN 2 times
5
MOFFN
Call block (Caller ID
subscribers only)
subscribers only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
when:
– the unit receives a call from a phone
– the unit receives a call without phone
number (“Blocking incoming calls
without phone number”, page 48).
without phone number”, page 48).
When a call is received, the unit rings for
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list:
– cellular calls are rejected.
– landline calls are disconnected after
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list:
– cellular calls are rejected.
– landline calls are disconnected after
the unit first sends out a busy tone to
the caller.
the caller.
Important:
R When the unit receives a call from a
R When the unit receives a call from a
number that is stored in the call block
list or a call without a recognized
phone number, the call is logged in
the caller list (page 50) with after
the call is disconnected.
phone number, the call is logged in
the caller list (page 50) with after
the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers
in the call block list.
You can store up to 30 phone numbers
in the call block list.
Important:
R We recommend storing 10 digits
R We recommend storing 10 digits
(including an area code). If only 7
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
n
From the caller list:
1
MFN CID
2
MbN: Select the entry to be
blocked.
R To edit the number, press
blocked.
R To edit the number, press
MSELECTN, then press MEDITN
repeatedly until the phone
number is shown in the
10-digit format.
repeatedly until the phone
number is shown in the
10-digit format.
3
MSAVEN
4
MbN: “Call block” a
MSELECTN
MSELECTN
5
MbN: “Yes” a MSELECTN
6
Edit the phone number if
necessary (24 digits max.).
necessary (24 digits max.).
7
MSAVEN a MOFFN
n
By entering phone numbers:
1
MMENUN#217 a MADDN
2
Enter the phone number (24
digits max.).
R To erase a digit, press
digits max.).
R To erase a digit, press
MCLEARN.
3
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
47
Programming