Analog Devices 82-000218-01 Manuale Utente
Bluetooth EZ-Extender Manual
2-9
Bluetooth EZ-Extender Hardware Reference
STAMP UART Connector (J1)
The STAMP UART connector (
J1
) allows the Bluetooth EZ-Extender to
be plugged onto an EZ-KIT Lite development board supporting a
STAMP interface. The
STAMP interface. The
J1
connector is located on the bottom side of the
board. For availability and pricing of the connectors, contact Samtec.
Refer to
Expansion Interface II Connector (J3)
The board-to-board connector (
J3
) provides signals for the SPI, TWI,
UART, SPORT interfaces and general-purpose I/O (GPIO) signals of the
mating EZ-Board. The connector is located on the bottom side of the
board. For availability and pricing of the connectors, contact Samtec.
mating EZ-Board. The connector is located on the bottom side of the
board. For availability and pricing of the connectors, contact Samtec.
Refer to
Part Description
Manufacturer
Part Number
10-position 0.1”, SMT socket
SAMTEC
SSW-105-22-F-D-VS
Mating Connector
10-position 0.1’’, SMT header
SAMTEC TSSH
TSSH-105-01-L-DV-A
Part Description
Manufacturer
Part Number
50-position 0.1’’, SMT socket
SAMTEC
SSW-125-22-F-D-VS
Mating Connector
50-position 0.1’’, SMT header
SAMTEC
TSSH-125-01-L-DV-A