Chevrolet 6405/4410 Manuale Utente

INSTALLATION INSTRUCTIONS 

 
 
Models:    6405/4410 & 6405/4410TK  GM/Chevrolet  2007 – current (new body style) full size trucks and 
SUVs with manual power mirrors.   
 
 

CURRENTLY HAVE POWER MIRRORS, THE WRONG SET HAS BEEN ORDERED. 

 
Caution! - Do not attempt to manually extend or retract the mirrors.  They should be moved under their own 
motor power only. 
 
Tools required for the installation are: 7mm and 10mm sockets, trim panel remover, philips screwdriver, small 
screwdriver, needle nose pliers, razor knife, and an inch pound torque wrench.  If you have any questions after 
reading this installation manual, please call our service department at (800) 337-2557. 
 
REMOVAL OF EXISTING  MIRRORS 
 

1.  On the inside of the driver’s door, remove the triangular shaped trim piece and insulation foam in the 

mirror mounting area.  

 
2.  Remove the door lock by using a small screwdriver to release the tab 

while lifting the lock upward. 

 

3.  Remove door trim panel screws located under trim covers. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

4.  Remove window handle by releasing the retaining clip.