Crane Merchandising Systems 480 Manuale Utente
Refreshment Center Operators’ Guide
Tray Set-Up
December 2004
27
4800006
Remove and Install a Spiral Motor
Remove a Spiral Motor:
NOTE
Some steps may already be completed
1.
Remove the tray. (See "Remove a
Snack or Candy Tray" on page 19).
Snack or Candy Tray" on page 19).
2.
Disconnect the motor harness.
3.
Remove the spiral.
4.
Remove the spiral coupler.
5.
Lift the motor clear of the tray.
6.
Return the tray to the merchandiser.
Install a Spiral Motor:
1.
Remove the tray. (See "Remove a Snack or Candy Tray" on page 19).
2.
Place the motor in the correct position at the rear of the tray as shown.
3.
Place a gear in position if required by this set-up.
4.
Install a spiral coupler in the proper orientation. (See "Install a Gear" on page 28).
5.
Connect the motor harness.
GEAR
SPIRAL
COUPLER
BACKWALL
OF TRAY
˜
SPIRAL
MOTOR