Pella 808F0105 Manuale Utente

Part Number: 808F0105

© 2011 Pella Corporation

Always read the Pella® Limited Warranty before purchasing or installing Pella 

products. By installing this product, you are acknowledging that this Limited Warranty 

is part of the terms of the sale. Failure to comply with all Pella installation and maintenance 

instructions may void your Pella product warranty. See Limited Warranty for complete details at 

Flashing tape

Checkrail

YOU WILL NEED TO SUPPLY:

TOOLS REQUIRED:

• Cedar or Impervious shims/spacers (12 to 20)

• Closed cell foam backer rod/sealant backer (12 to 30 

ft.)

• Pella

®

 SmartFlash

™

 foil backed butyl window  

and door flashing tape or equivalent

• High quality exterior grade polyurethane or silicone 

sealant (1 tube per window)

• Great Stuff ™ Window and Door Insulating Foam 

Sealant by the Dow Chemical Company or equivalent 
low pressure polyurethane window and door foam - 

  DO NOT use high pressure or latex foams.

• Tape measure

• Level

• Hammer

• Utility knife

• Pry bar

• Sealant gun

• Screwdrivers  

(#2 Phillips and Flat blade)

• Putty knife

• Wood chisel

• Drill

SEALANT

SEALANT

Important! The Pella Replacement Window is designed to replace older style double-hung 

windows. The original window frame will remain in place and only the existing sash will be 

removed. Read these instructions thoroughly before beginning. Failure to install as recommended 

will void any warranty, express or implied. For types of installation other than shown, contact your 

local Pella representative or visit http://www.pella.com.