Panasonic SCHC58 Manuale Utente

RQT9754

With this function set to “ON”, you can stream 
music from the iOS device or 
Mac / PC (iTunes 10.2.2 or later) to this unit without 
the need of a wireless network router.
≥ Previous network settings will be deleted when 

this function is set to “ON”.

≥ The following explanations are based on an 

iPhone.

Press [SETUP] repeatedly to select 
“D.CONNECT”.

Press [3, 4] to select “ON” and then press 
[OK].

Press [3, 4] to select “OK? YES” and then 
press [OK].

Connect your iPhone to this unit’s wireless 
network named “HC58 _ _ _ _ _ _”*

2

.

Enter the password that is indicated on this 
unit’s display.

Once the iPhone is connected to this unit’s 
wireless network, the setup is competed.

Continue to step 2 of “Using AirPlay with this 
unit’s speakers” 

(l 11

).

≥ This setting is reset to “OFF” when other network 

settings are performed. (l 8)

≥ When “D.CONNECT” is set to “ON”, this unit will not be 

connected to the Internet. It is not possible to update the 
software or check the Wi-Fi signal strength.

≥ When AirPlay is not being used, disconnect the AirPlay 

compatible device from this network.

≥ When using a computer on this network, make sure that 

all the shared files are encrypted.

≥ This feature is only compatible with the “Open System” 

authentication method. It is not compatible with “Shared 
Key” authentication method.

The first time “D.CONNECT” is set to “ON”, a 
password for this unit’s wireless network is 
randomly created and memorized in this unit.
≥ This password is memorized until it is changed.
1

While “D.CONNECT” is set to “ON”:
Press [SETUP] repeatedly to select 
“D.CONNECT”.

2

Press  [3, 4] to select “ON” and then press 
[OK].

3

The current password is displayed.
≥ The 5 digits after "PW" is the password for 

this network.

4

Press any button to exit.

1

While “D.CONNECT” is set to “OFF”:
Press [SETUP] repeatedly to select 
“D.CONNECT”.

2

Press  [3, 4] to select “CHANGE PW” and 
then press [OK].

3

Press  [3, 4] to select “OK? YES” and then 
press [OK].

4

The new password is displayed.
≥ The 5 digits after "PW" is the new password 

for this network.

5

Press any button to exit.

∫ Note about changing the password

After changing this unit’s wireless network 
password, if you are not prompted to change the 
password on the other devices, the following 
changes are required.

iOS device (iPod touch/iPhone/iPad)*

3

:

≥ Before choosing this unit’s network,
1

Select [ ] located beside this unit’s wireless 
network name.

2

Select “Forget this Network” and then select 
“Forget”.

3

Select this unit’s wireless network and enter the 
new password.

Mac/PC:
≥ If the computer has memorized the old password, 

be sure to change the memorized password for 
this unit’s wireless network to the new one.

≥ Refer to the devices’s operating instructions for details.
*1: “ _ ” stands for a digit
*2: “ _ ” stands for a digit that is unique to each set.
*3: Steps are based on iOS 6.0.1.

“PW _ _ _ _ _”*

1

 is displayed.

The 5 digits after "PW" is the password for this 
network.

 _ _ _ _ _ _

 _ _ _ _ _ _

Display the password

Change the password

SC-HC58~RQT9754.book  Page 12  Tuesday, December 18, 2012  4:40 PM