Kenwood DPX300U Manuale Utente
10 | Quick Start Guide
Installation the Unit
Installing the trim plate
Attach Accessory 2 to the unit.
Accessory 2
Installing the unit
Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil
and attach it in place.
⁄
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction (for
example, the sound may skip).
example, the sound may skip).
Installing in Japanese-Made Cars and
General Motors Cars
Install onto the car bracket using the supplied screws
(Accessory 5 or Accessory 6).
The holes of the car bracket to use will differ
depending on the car model.
(Accessory 5 or Accessory 6).
The holes of the car bracket to use will differ
depending on the car model.
Accessory 5 (M5 × 8 mm)
or Accessory 6 (M5 × 8 mm)
or Accessory 6 (M5 × 8 mm)
Car Bracket
Installing Toyota Cars
Install onto the car bracket using the supplied screws
(Accessory 6).
Use the mounting holes (
(Accessory 6).
Use the mounting holes (
¦ in the illustration shown
below) that fit the car bracket.
Accessory 6 (M5 × 8 mm)
Car Bracket
Accessory 3
(Only for TOYOTA car)
(Only for TOYOTA car)
B59-2162-00_00_13-2DIN_QSG_K_en.indd 10
12/11/21 14:42