Philips CEM3100 Manuale Utente

23

EN

10 Troubleshooting

Caution

 

•

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair 

the system yourself. 

If you encounter problems when using this 

apparatus, check the following points before 

requesting service. If the problem remains 

unsolved, go to the Philips web site (www.

philips.com/support). When you contact Philips, 

ensure that your apparatus is nearby and the 

model number and serial number are available.

No power or no sound. 

 • Car engine is not on. Turn the car engine 

on.

 • Cable is not correctly connected. Check 

connections.

 • Fuse is burnt. Replace fuse.

 • Volume is too low. Adjust volume. 

 • If the above solutions cannot help, press 

the RESET button.

 • Ensure that the track played is of a 

compatible format.

Noise in broadcasts.

 • Signals are too weak. Select other stations 

with stronger signals.

 • Check the connection of the car antenna.

 • Change broadcast from Stereo to mono.

Cannot play disc

 • Ensure that the disc label is inserted with 

the printed side facing up. 

 • Wipe the disc with fibre cleaning cloth

from the centre to the edge in a straight 

line.

 • This disc may be defective. Play another 

disc.

 • Ensure that the CD is a finalised CD/

CD-R/CD-RW.

 • Ensure that the CD is not encoded with 

copyright protection technologies.

The CD skips tracks

 • Ensure that the CD is not damaged or 

dirty.

 • Ensure that random mode is deactivated.

Disc cannot be ejected

 • Press and hold  .

Preset stations lost.

 • Battery cable is not correctly connected. 

Connect the battery cable to the terminal 

that is always live.

Display show ERR-12

 • USB data error. Check the USB device.