Radio Shack PLCDCS 200 Manuale Utente

11

The following suggestions help you care
for the product so that you can enjoy it
for years.

1. Keep the product dry.  If it does get 

wet, wipe it dry immediately.
Liquids might contain minerals that 
can corrode the electronic circuits.

2. Keep the product away from dust and

dirt, which can cause premature wear
of parts.

3. Handle the product gently and 

carefully.  Dropping it can damage 
circuit boards and cases, and can 
cause the product to work improperly.

4. Wipe the product with a dampened 

cloth occasionally to keep it looking 
new.  Do not use harsh chemicals, 
cleaning solvents, or strong 
detergents to clean the product.

5. Use and store the product only in 

normal temperature environments.
High temperature can shorten the life
of electronic devices, damage 
batteries, and distort or melt plastic 
parts.

Periodic cleaning of the tape head and
capstan shaft will ensure good
reproduction of music and trouble-free
operation.  Cleaning of the tape head
should be done every 20 to 30 hours of
operation or when the high tones have
become less clear.

1. Use a cassette cleaning cartridge if 

available.  If one is not available, use 
a cotton swab soaked in isopropyl 
(rubbing) alcohol.

2. While holding the tape door open, 

locate tape head to the right of the 
opening and in the centre of the unit.

3. Clean the tape head with the cotton 

swab.

4. Clean the capstans and the pinch 

rollers with the cotton swab.

5. Allow the tape head, capstans and 

pinch rollers to dry before operating.

6. Do not touch the tape with your 

fingers; if it becomes lose, wind it 
back by twisting a six-sided pencil in
the cassette reel.