Sony XR-C7200 Manuale Utente
8
EN
Receiving the memorized
stations
stations
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
desired band.
desired band.
3
Press the number button ((1) to (10))
momentarily where the desired station is
stored.
momentarily where the desired station is
stored.
If you cannot tune in a preset
station
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT)
If the automatic tuning stops too frequently, press
(SHIFT)
, then press (3) (PLAY MODE) repeatedly until
“Local” (local seek mode) appears. Then press (4) (n) to
select “Local on.” Press (SHIFT).
Only the stations with relatively strong signals will be
tuned in.
select “Local on.” Press (SHIFT).
Only the stations with relatively strong signals will be
tuned in.
Tip
If you know the frequency of the station you want to listen
to, press and hold down either side of (SEEK/AMS) for a
few seconds until the desired frequency appears (manual
tuning).
If you know the frequency of the station you want to listen
to, press and hold down either side of (SEEK/AMS) for a
few seconds until the desired frequency appears (manual
tuning).
If FM stereo reception is poor
— Monaural Mode
— Monaural Mode
1
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “Mono” appears.
MODE) repeatedly until “Mono” appears.
2
Press (4) (n) repeatedly until
“Mono on” appears.
The sound improves, but becomes
monaural (“ST” disappears).
“Mono on” appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press (SHIFT).
To go back to the normal mode, select “Mono
off” in step 2 above.
off” in step 2 above.
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
as follows:
Frequency ˜ Clock
Memorising only the
desired stations
desired stations
You can store up to 10 stations on each band
(20 for FM 1 and FM 2, 20 for SW 1 and SW 2,
10 for MW) in the order of your choice.
(20 for FM 1 and FM 2, 20 for SW 1 and SW 2,
10 for MW) in the order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
desired band.
desired band.
3
Press either side of (SEEK/AMS) to tune
in the station you want to store on the
number button.
in the station you want to store on the
number button.
4
Keep the desired number button ((1) to
(10)) pressed until “MEM” appears in the
display.
(10)) pressed until “MEM” appears in the
display.
The number button indication appears in the
display.
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
If you try to store another station on the same number
button, the previously stored station will be erased.