Sony MEX-DV1100 Manuale Utente

Disc operation

The disc cannot be loaded.

• Another disc is already loaded.
• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not play back.

• Defective or dirty disc.
• The disc is not applicable.
• The DVD is not applicable due to the region code.
• The disc is not finalized (page 48).
• The disc format and file version are incompatible

with this unit (page 8, 48).

• Press Z to remove the disc.

MP3/WMA/JPEG/DivX files do not play back.

• Recording was not performed according to the ISO

9660 level 1 or level 2, the Joliet or Romeo in the
expansion format (DATA CD), or the UDF Bridge
format (DATA DVD) (page 48).

• The file extension is incorrect (page 49).
• Files are not stored in MP3/WMA/JPEG/DivX

format.

• If the disc contains multiple file types, only the

selected file type (audio/video/image) can be played.

t Select the appropriate file type using the list

(page 32).

MP3/WMA/JPEG/DivX files take longer to play
back than others.

The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in Multi Session/Multi Border.
– a disc to which data can be added.

The disc does not start playing from the
beginning.

Resume playback or multi-disc resume playback
(page 40) has taken effect.

Certain functions cannot be performed.

Depending on the disc, you may not be able to perform
operations such as stop, search, or repeat/shuffle play.
For details, see the manual supplied with the disc.

The soundtrack/subtitle language or angle
cannot be changed.

• Use the DVD menu instead of the direct selection

button on the card remote commander (page 17).

• Multilingual tracks, multilingual subtitles, or multi-

angles are not recorded on the DVD.

• The DVD prohibits changing.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “A.SCRL” is set to “OFF.”

t Set “A.SCRL ON” (page 43).

The operation buttons do not function.
The disc will not eject.

Press the RESET button (page 14).

You forgot the password for parental control.

Enter “5776” in the password input display to unlock
(page 28).

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power antenna (aerial) control lead (blue)

or accessory power supply lead (red) to the power
supply lead of a car’s antenna (aerial) booster (only
when your car has built-in FM/MW/LW antenna
(aerial) in the rear/side glass).

• Check the connection of the car antenna (aerial).
• The auto antenna (aerial) will not go up.

t Check the connection of the power antenna

(aerial) control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Set “LOCAL ON” (page 44).

t Tuning does not stop at a station:

Set “MONO ON” (page 44).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set “MONO ON” (page 44).

An FM program broadcast in stereo is heard in
monaural.

The unit is in monaural reception mode.
t Set “MONO OFF” (page 44).

RDS

The SEEK starts after a few seconds of
listening.

The station is non-TP or has weak signal.
t Deactivate TA (page 35).

No traffic announcements.

• Activate TA (page 35).
• The station does not broadcast any traffic

announcements despite being TP.

t Tune in another station.

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the program type.