Garmin 696 Manuale Utente

190-00919-00 Rev. F

45

•

Waypoint—Enter any waypoint along the currently active route as the
reference waypoint.  The reference waypoint defines the target location.

•

Profile—Enter the descent rate.

•

Altitude—Enter the desired reference waypoint altitude. Select ‘Above
Waypoint’ to use field elevation for airports in the Jeppesen database or ‘MSL’ 
to specify an exact MSL altitude target.

•

By—Enter the target location with settings of distance ‘Before’ or ‘After’ a
reference  waypoint.  To set a target location at a reference waypoint, enter a 
distance of zero.

•

VNAV Messages—Select ‘On’ or ‘Off’ to enable/disable VNAV alert messages.

1)  From the Map Page, press the MENU Key to display the Map Page Menu 
2)  Turn or move the FMS Joystick to highlight ‘Enable VNAV Indicator’ or 

‘Disable VNAV Indicator’, and press the ENT Key.

1)  Enter a valid VNAV profile and begin navigation.
2)  From the Map Page, press the MENU Key to display the Map Page Menu 
3)  Turn or move the FMS Joystick to highlight ‘Capture VNAV Profile’ or 

‘Cancel Capture’, and press the ENT Key.  Selecting ‘Capture VNAV Profile’ 
centers the VNAV indicator on the HSI (when displayed).