Juniper DPCE-R-40GE-TX Manuale Utente
•
Configurable WAN-PHY mode options
•
See
for information about the protocols and applications that this DPC supports.
Software features
•
You can install any transceiver supported by the DPC. For information about installing and
removing transceivers, see the hardware guide for your router.
removing transceivers, see the hardware guide for your router.
•
Fiber-optic 10-gigabit small form-factor pluggable (XFP) transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
•
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
•
10GBASE-S (model number: XFP-10G-S)
•
10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Specifications
•
DWDM Tunable XFP transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
10GBASE-ZR (model number: XFP-10G-CBAND-T50-ZR)
DWDM supported wavelengths—see 10-Gigabit Ethernet DWDM Transceiver Wavelengths
DWDM supported wavelengths—see 10-Gigabit Ethernet DWDM Transceiver Wavelengths
NOTE:
XFP-10G-CBAND-T50-ZR is supported in Junos OS Release 10.2 and later
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Specifications
Cables and connectors
OK/FAIL
LED, one bicolor:
•
Steady green—DPC is functioning normally.
•
Blinking green—DPC is transitioning online or offline.
•
Red—DPC has failed.
TUNNEL
LED, one green per port:
•
Off—Normal operating mode.
•
On steadily—Port configured in tunnel mode.
LINK
LED, one green per port:
•
Off—No link.
•
On steadily—Link is active.
The
TUNNEL
and
LINK
LEDs are labeled top to bottom:
•
2-port:
0/0
through
1/0
•
4-port:
0/0
through
3/0
LEDs
Related
Documentation
•
•
•
10-Gigabit Ethernet 10GBASE Optical Interface Specifications
27
Copyright © 2013, Juniper Networks, Inc.
10-Gigabit Ethernet Enhanced DPCs with XFP