Toshiba A130/A135 Manuale Utente

160

Click Settings then Fingerprint Storage Inspector. 

The Fingerprint Storage Inspector screen is displayed. 

If other fingerprint data is still displayed on the list, hold down 
the 

Control

 key and select each fingerprint until they are all 

selected, then click Remove. 

Click OK to make the changes permanent.

Check that all Fingerprint data was deleted on the Fingerprint 
Storage Inspector screen. 

Failure to follow these guidelines and/or procedures might result in 
damage to the reader or cause reader failure, finger recognition 
problems, or lower finger recognition success rate.

❖

Do not scratch or poke the reader with your nails or any hard or 
sharp objects.

❖

Do not press the reader with too much pressure.

❖

Do not touch the reader with a wet finger or any wet objects. 
Keep reader surface dry and free of water vapor.

❖

Do not touch the reader with a soiled finger. Minute foreign 
particles on a soiled or dirty finger may scratch the reader.

❖

Do not paste stickers or write on the reader.

❖

Do not touch the reader with a finger or any object with built-
up static electricity.

Observe the following before you swipe your finger on the reader, 
whether for fingerprint enrollment/registration or recognition.

❖

Wash and dry your hands thoroughly.

❖

Remove static electricity from your fingers by touching any 
metal surface. Static electricity is a common cause of reader 
failures, especially during dry seasons such as winter.

❖

Clean the reader with a lint-free cloth. Do not use detergent to 
clean the reader.