Panasonic TH-85PF12U Manuale Utente

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the 
equipment which has been connected to the Plasma Display.

Input signals will change as follows:

Notes:
•  Selecting is also possible by pressing the INPUT button on the unit.
•  Input terminal will not be selected if the terminal board is not installed into the SLOT.
•  Select to match the signals from the source connected to the component/RGB input terminals. 

(see page 50)

•  In 2 screen display, the same input mode cannot be selected for the main picture and sub 

picture.

•  Image retention (image lag) may occur on the plasma display panel when a still picture is kept 

on the panel for an extended period. The function that darkens the screen slightly is activated 
to prevent image retention (see page 60), but this function is not the perfect solution to image 
retention.

INPUT1

INPUT2A

PC

INPUT3

INPUT2B

SLOT2 is for dual input so that you can select INPUT2A or 
INPUT2B for INPUT2.
INPUT2A :  HDMI signal terminal in SLOT2
INPUT2B : HDMI signal terminal in SLOT2

Press the INPUT “1”, “2”, “3” or “PC” 
input mode selection button to select 
the INPUT mode.
Press 

 to switch the input mode 

between INPUT2A and INPUT2B.