Toshiba a350d Manuale Utente

Pagina di 239
User’s Manual
4-34
Operating Basics
6. Windows Welcome screen will be displayed, and will be logged in 
automatically to Windows.
1:1 Mode Login screen
1. Turn on the computer.
2. The Select Tiles screen will be displayed.
3. Select Start face recognition (
).
4. The Select Account screen will be displayed.
5. Select the account, and click the Arrow button.
6. "Please turn your face to the camera" will be displayed.
7. Verification will be performed. If the authentication is successful, the 
image data taken in step 6 will be faded in and placed over one another.
8. Windows Welcome screen will be displayed, and will be logged in 
automatically to Windows.
Modem
This section describes how to connect and disconnect the internal modem 
to and from a telephone jack.
If an error occurs during authentication, you will be returned to the 
Select Tiles screen.
If authentication was successful, but an authentication error 
subsequently occurred during the login to Windows, you will be asked 
to provide your account information.
Connection to any communication line other than an analog phone line 
could cause a computer system failure.
Connect the built-in modem only to ordinary analog phone lines.
Never connect the built-in modem to a digital line (ISDN).
Never connect the built-in modem to the digital connector on a 
public telephone or to a digital private branch exchange (PBX).
Never connect the built-in modem to a key telephone system for 
residences or offices. 
Avoid using your computer modem with the telephone cable connected 
during an electrical storm. There may be a remote risk of electric shock 
from lightning.
Modem functions cannot be used in models which are not equipped 
with a modem.
This information is applicable to the models equipped with a built-in 
modem.
Some models are equipped with a modem jack or FM antenna port.