Toshiba a350d Manuale Utente

User’s Manual

8-13

Optional Devices

4. Carefully pull an eSATA device's USB (eSATA combo) connector out 

from within the computer's USB (eSATA combo) port.

An external analog monitor can be connected to the computer's external 

monitor port, with the computer supporting WUXGA video mode. In order to 

connect a monitor, follow the steps as detailed below:
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port and tighten the 

screws on the left and right hand side of the connector as required.

3. Turn the external monitor’s power on.
4. Turn the computer's power on. 
When you turn on the power, the computer will automatically recognize the 

monitor and determine whether it is a color or monochrome device. In the 

event that you find that there are issues getting an image displayed on the 

correct monitor, you should consider using the FN + F5 hot key to change 

the display settings (if you then disconnect the external monitor before you 

turn the computer's power off, be sure to press FN + F5 hot key again to 

switch to the internal display).
Please refer to Chapter 5, 

, for further details on using hot 

keys to change the display setting.

The Video data on your computer can be viewed on a TV set. To do so, 

connect your computer’s HDMI out port to the TV using the HDMI out 

cable.

Monitor Cable

External 

Monitor Port