Toshiba a350d Manuale Utente

User’s Manual

8-18

Optional Devices

To connect the i.LINK (IEEE1394) cable, follow the steps as detailed below:
1. Make sure the connectors are properly aligned and plug the i.LINK 

(IEEE1394) cable into the computer.

2. Plug the other end of the cable into the device.
Note of the following when you use i.LINK:

■

You may need to install drivers for your i.LINK devices.

■

Not all i.LINK devices have been tested. Therefore, compatibility with all 

i.LINK devices cannot be guaranteed.

■

Some devices might not support sleep or automatic off functions.

■

Do not connect or disconnect an i.LINK device while it is using an 

application or when the computer is automatically shutting it down to 

save power. Data might be destroyed.

To disconnect the i.LINK (IEEE1394) cable, follow the steps as detailed 

below:
1. Open the Safely Remove Hardware icon on the Windows Task Bar.
2. Point to i.LINK (IEEE1394) device and click.
3. Disconnect the cable from the computer then from the i.LINK device.

i.LINK (IEEE1394) port