Toshiba a350d Manuale Utente

User’s Manual

3-14

Getting Started

1. Turn off your computer.
2. While holding down 0 (zero) key on the keyboard, turn on your 

computer.

3. A menu will be displayed from which you should follow the on-screen 

instructions.

If the pre-installed files are damaged, you are able to either use the 

Recovery Discs you have created or the hard disk drive recovery process 

to restore the computer to the state it was in when you originally received it. 

To perform this restoration, follow the steps below:

1. Load the Recovery Discs into the optical disc drive and turn off the 

computer's power.

2. While holding down F12 key on the keyboard, turn on your computer - 

when TOSHIBA Leading Innovation>>> appears, release the F12 

key.
For 2HDD Model, If HDD1 is first, go to step 3. If HDD1 is not first, do as 

follows:

■

Select Enter Setup.

■

Press the F9 key to set to default settings, and select the Yes.

■

When the "In Touch with Tomorrow TOSHIBA" prompt appears, 

press the F12 key to display the Boot menu. Continue with step 3.

3. Use the up and down cursors key to select the CD-ROM icon from the 

menu. Please refer to the 

 section in Chapter 7, 

 for further information.

4. A menu will be displayed from which you should follow the on-screen 

instructions.

When the sound mute feature has been activated by pressing the FN + 

ESC key, be sure to disable this to allow sounds to be heard before starting