Soundstream Technologies REF1.500 Guida Utente

20 

 

NO SOUND 

Is the Status LED illuminated GREEN?  NO? 

Check all fuses to the amplifier 

Confirm remote turn-on lead is connected at the amp and at 
the radio/switched +12Volts 

Clean contacts on fuse holder 
Verify ground is secure 

Is the Status LED illuminated GREEN?  Yes? 

Check gain on amp 
Check source level volume 
Check for Speaker or wire short 

AMP NOT SWITCHING ON 

No power to power wire 

Re-secure power cable 

Poor Ground 

Must have bare metal ground 

Does remote wire have +12V 

Check at source and amp 

Check fuses 

Burnt, broken, detached? 

NO SOUND ON ONE CHANNEL 

Check speaker wire 

Look for shorts, pinches or disconnected terminal 

Check RCAs 

Swap left with right.  If the bad side began working, the prob-
lem is before the amplifier 

AMP SHUTS DOWN 

Check speaker load  

Verify that the load does not drop below the specified ohm 
level 

STATUS LED IS ON - RED 

Check temperature 

Wait for amp to cool down 

Speakers shorted 

Check to see if it is the wire or the speakers themselves 

SMOKE CAME OUT 

Either you spilled your beer on it or did not read 
this manual and follow the directions  

Put smoke back inside 

CAN’T KEEP THE OPPOSITE 

SEX OFF ME 

Is volume loud enough for others to hear? 

To avoid the opposite sex, buy a different brand of amplifier