Alphasonik PM6002E Manuale Utente

  

Investigate the layout of your vehicle thoroughly before 

drilling or cutting.  Take care when     you work near the gas tank, 

gas lines, hydraulic lines, electrical components and electrical 

wiring.  Do not use the equipment unmounted.   Attach this sys-

tem securely to prevent damage, particularly in the event of an 

accident or aggressive driving.  Do not mount the system so that 

wire connections are unprotected or are subjected to pinching 

or damage from nearby objects.  Before connecting or discon-

necting power connections at the system power terminals, dis-

connect the +12V DC wire at the battery end.  Confirm that your 

source unit and other equipment are turned off while connecting 

the input terminals.  If you need to replace the power fuse, re-

place it only with a fuse identical to the provided fuse.  Using a 

fuse of different type or rating may result in damage to the sys-

tem, which is not covered by the manufacturer’s warranty.  Do 

not install any product where it may be subjected to excessive 

heat, moisture and dust or where it may be repeatedly kicked, 

brushed or bumped.  Make absolutely sure that the terminals 

for the products are connected to the proper inputs and outputs 

from the music source.  Never run the wiring on the outside of 

the vehicle or under it where it can be damaged by road hazards 

or any moving parts of the vehicle.  Use existing wire channels, 

sills, panels and molding strips inside the vehicle to hide the wir-

ing for safety and a neat appearance.  

 

IMPORTANT:  Never cut any metal that is an integral part 

of the vehicle’s safety or structural support system.  If you are 

unsure, it is best to have the product professionally installed by 

an Authorized Alphasonik Dealer.  Never sacrifice your safety for 

sound.