Toshiba U600D Manuale Utente
User ’s Manual
C-3
Wireless LAN
Supported Frequency Sub-bands
Subject to the radio regulations that apply in the countries/regions, your Wireless
LAN card may support a different set of 2.4 GHz channels. Consult your
Authorized Wireless LAN or TOSHIBA Sales office for information about the radio
regulations that apply in the countries/regions.
LAN card may support a different set of 2.4 GHz channels. Consult your
Authorized Wireless LAN or TOSHIBA Sales office for information about the radio
regulations that apply in the countries/regions.
Wireless IEEE 802.11 Channels Sets (Revision B,
G and draft N)
G and draft N)
Frequency Range
Channel ID
2400-2483.5 MHz
1
2412
2
2417
3
2422
4
2427
5
2432
6
2437
7
2442
8
2447
9
2452
10
2457
11
2462
12
2467
*1
13
2472
*1
*1
Refer to the sheet Approved Countries/Regions for use for the countries/regions
that in which these channels can be used.
that in which these channels can be used.
When installing Wireless LAN cards, the channel configuration is managed as
follows:
follows:
n
For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless
LAN card will automatically start operation at the channel identified by the
Wireless LAN Access Point. When roaming between different access points
the station can dynamically switch to another channel if required.
LAN card will automatically start operation at the channel identified by the
Wireless LAN Access Point. When roaming between different access points
the station can dynamically switch to another channel if required.
n
In a Wireless LAN Access Point, the Wireless LAN card will use the factory-
set default channel (printed in bold), unless the LAN Administrator selected a
different channel when configuring the Wireless LAN Access Point device.
set default channel (printed in bold), unless the LAN Administrator selected a
different channel when configuring the Wireless LAN Access Point device.