Alpine cda-7873 Manuale Utente
10
-EN
Basic Operation
f UP
g DN
B-FWD/DEFEAT
DISP/B.OUT
Setting Bass Forward
The Bass Forward function shifts the low
frequency's energy component to the front. This
moves the high energy, dynamic bass sound to
the front sound stage.
frequency's energy component to the front. This
moves the high energy, dynamic bass sound to
the front sound stage.
1
Press the B-FWD button to activate the Bass
Forward setting mode.
Forward setting mode.
2
Press the g DN button or f UP button to
select the Bass Forward level.
select the Bass Forward level.
OFF
←→ 1 ←→ 2 ←→ 3
(Less
←....→ More)
NOTE
If no buttons are pressed within 5 seconds, the setup
menu returns to the normal audio display.
If no buttons are pressed within 5 seconds, the setup
menu returns to the normal audio display.
Defeat
By setting Defeat ON, all previously adjusted
settings will return to the factory defaults.
settings will return to the factory defaults.
1
Press the DEFEAT button for more than 3
seconds to turn Defeat on.
seconds to turn Defeat on.
To cancel Defeat, press the DEFEAT button
again for more than 3 seconds.
again for more than 3 seconds.
Switching the Tuner Mode
The CDA-7977/CDA-7876/CDA-7875/CDA-7873
incorporates the MAX TUNE SQ for the highest
quality tuner audio. Moreover, you can choose
between two settings to suit your own personal
sound preferences and usage.
incorporates the MAX TUNE SQ for the highest
quality tuner audio. Moreover, you can choose
between two settings to suit your own personal
sound preferences and usage.
1
Press and hold the SETUP button for at least 3
seconds.
seconds.
2
Press the f UP button repeatedly to select
"NORMAL or HI-FI." Each press of the f UP
button changes the modes as shown:
"NORMAL or HI-FI." Each press of the f UP
button changes the modes as shown:
∗ CDA-7876 Only
NOTE
If you press the g DN button the display scrolls in
reverse sequence.
If you press the g DN button the display scrolls in
reverse sequence.
3
Press the TUNE button to switch the TUNER
mode.
mode.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
HI-FI: Sound quality priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to
the tuner in the HI-FI mode, we recommend you
change to the NORMAL mode.
change to the NORMAL mode.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
button to return to the normal mode.
SETUP
BAND
HI-FI
←→ NORMAL
→ NORMAL/HI-FI → AMBER* → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ←BEEP ←