Motorola DSR-6400 Manuale Utente

PR Field (DSR-6402, DSR-6403, and DSR-6404 only)

Default: 1

The PR (processor) field does not appear on a DSR-6401. Press the4button until the cursor is at

the PR label, and press ENTER to move into the field. While ensuring that the cursor remains on
the up/down symbol ( ), press the  buttons to scroll throughout the available processor

values. Press ENTER to confirm the selection and exit the field.

Note: Changing this value will change all other PR fields throughout this unit’s menu system to
the same value that is set here.

Aud Field

Default: 0

Use the Audio field to choose which audio channel to display the status. Press the 4 button until

the cursor is at the Audio field, then use the  buttons to choose the first audio channel (0) or

the second audio channel (1). Press ENTER to confirm the selection and exit the field.

Format Field

This field is always set to PSTHRU (pass-through) and cannot be changed.

Mode Field

The Mode field indicates the mode (stereo or mono) for the selected audio channel. Dashes (---)
designate no information is available.

BitR Field

The BitR (Bit Rate) field indicates the data rate of the transcoded audio. Dashes (---) designate no
information is available.

Status11 Menu

This status-only screen displays the multicast IP Address and Link status of the GigE input when
receiving a transport stream input. Press the  buttons until the Status11 menu appears.

Addr Field

This status-only field displays the multicast IP address (range 224.000.000.000 to
239.255.255.255) that is currently used to receive an input transport stream in the common
dotted-decimal format. Dashes (---) designate no information is available.

Link Field

This status-only field indicates the connection speed (10, 100, or 1000 Mbps) of the GigE port.
Off indicates that there is no connection to an Ethernet network.





E ----------

Off

STATUS11 Addr Field Link Field