Panasonic CQ-CB8901U Manuale Utente

51

50

1

3

2

ACC

BATTERY 15A

FRONT SP

REAR SP

Power Lead (ACC or IGN) To ACC power, +12 V DC.

Ground Lead To a clean, bare metallic part of the car chassis.

Battery Lead To the car battery, continuous +12 V DC.

Fuse (15 A)  Refer fuse replacement to your nearest authorized Panasonic 
Servicenter. Do not try fuse replacement by yourself.

(Red)

(Black)

(Yellow)

(Blue w/white stripe)

(Blue)

External Amplifier Control Power Lead To an external amplifier. 
(Max. 100 mA) 

(R) (Red)

(L) (White)

Pre-out Cord (Rear)

Pre-out Cord (Front)

AUX1-IN

CH/AUX2-IN

S

･W-OUT

PRE-OUT REAR

PRE-OUT FRONT

Antenna

AUX Input Connector

CD Changer/AUX/XM receiver Input Connector
The RCA cord of a CD changer/AUX/XM receiver 
should be connected.

Subwoofer Output Connector
The RCA cord of a external power amplifer should be connected.

Motor Antenna Relay Control Lead  To Motor Antenna. (Max. 100 mA) 
(This lead is not intended for use with a switch actuated power antenna)

Front Left + (White)
Front Left – (White w/black stripe)

Rear Right + (Violet)
Rear Right – (Violet w/black stripe)

Front Right + (Gray)
Front Right – (Gray w/black stripe)

Rear Left + (Green)
Rear Left – (Green w/black stripe)

Speaker lead

(R) (Red)

(L) (White)

(R) (Red)

(L) (White)

(R) (Red)

(L) (White)

Not used  (Brown w/white stripe)

(Red)

(White)

¡

This unit is designed for use in a car having a 12 V negative ground battery system.

¡

To prevent damage to the unit, be sure to follow the connection diagram below.

¡

Strip about 5 mm of the lead ends for connection.

¡

Do not insert the power connector into the unit until the wiring is completed.

¡

Be sure to insulate any exposed wires to prevent short circuiting with the car chassis.  Bundle all
cables, and prevent cable terminals from touching any metal parts.

¡

Remember, if your car has drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.