ONKYO C-773 Manuale Utente

 

7

 

1

 

Press once to turn on the A-933. Press again to turn 
on the C-733.

 

2

 

Use these buttons to enter track numbers.

 

3

 

Press to pause playback.

 

4

 

Press to stop playback.

 

5

 

Press and hold to fast reverse or fast forward during 
playback.

 

6

 

Press to set repeat playback.

 

7

 

Press to set memory program.

 

8

 

Press to set random playback.

 

9

 

Press to remove the last track in the program.

 

0

 

Press to start playback.

 

A

 

Press to select the previous or next track.

 

B

 

Press to change the displayed information.

The C-733 doesn’t have its own remote controller, but it 
can be controlled by using the remote controller 
(RC-613S) that’s supplied with the Onkyo A-933 
Integrated Amplifier. The C-733 and A-933 must be 
connected with an 

 cable and an analog audio cable 

for this to work.
When controlling the C-733 with the A-933’s remote 
controller, point the controller at the A-933’s remote 
sensor, as shown.

 

• The remote controller may not work reliably if the 

A-933 is subjected to bright light, such as direct sun-
light or inverter-type fluorescent lights. Keep this in 
mind when installing.

• If another remote controller of the same type is used in 

the same room, or the A-933 is installed close to 
equipment that uses infrared rays, the remote control-
ler may not work reliably.

• Don’t put anything, such as a book, on the remote con-

troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.

• The remote controller may not work reliably if the 

A-933 is installed in a rack behind colored glass doors. 
Keep this in mind when installing.

• The remote controller will not work if there’s an obsta-

cle between it and the A-933’s remote control sensor.

2

1

3
4

5

6

8

7

9
0

A

B

30

°

5m

30

°

RC-613S

C-733

A-933

Remote control 
sensor

*En_C733_02.fm Page 7 Wednesday, December 22, 2004 3:07 PM