ONKYO CR-505DAB Manuale Utente

33

Timers—Continued

Once: For single use.
Every: For weekly use.

SUN (Sunday)

FRI (Friday)

MON (Monday)

SAT (Saturday)

TUE (Tuesday)

Every Day

WED (Wednesday)

Days Set

THU (Thursday)
The “Every Day” and “Days Set” (specifies a range of 
days) options only appear if you select “Every” in step 
4.

After the ON time has been set, the OFF time is auto-
matically set to one hour later.

The TIMER indicator appears, as shown.

If you use any 

-connected cassette tape deck or MD 

recorder as a recording device, you must also set the 
device to standby mode.

Notes:
• You can cancel the timer setting procedure at any time by 

pressing the [TIMER] button.

• If you’re using a timer to start playback, be sure to set the 

volume to a suitable level. If the [VOLUME] control is 
set to minimum, you won’t hear anything when the timed 
playback task starts.

• If you set the playback source to CD, don’t forget to load 

a CD into the CR-505DAB before setting it to Standby 
mode.

• If you’re using a timer to start recording on an Onkyo cas-

sette tape deck connected via 

, be sure to select the 

correct input source on the cassette tape deck, and load a 
cassette tape before switching the CR-505DAB to 
Standby mode.

• If you’re using a timer to start recording on an Onkyo 

Mini Disc recorder connected via 

, be sure to connect 

the recorder’s analog inputs to the CR-505DAB’s analog 
outputs. And be sure to select the correct input source on 
the MD recorder.

• For timed recording, it’s a good idea to set the start time 

a little before the actual start time of the program that you 
intend to record.