ONKYO CR-505DAB Manuale Utente

 

4

 

The CR-505DAB uses a battery-less memory backup sys-
tem in order to retain radio presets and other settings when 
it’s unplugged or in case of a power failure. Although no 
batteries are required, the CR-505DAB must be plugged 
into an AC outlet in order to charge the backup system.
Once it has been charged, the CR-505DAB will retain the 
settings for several weeks, although this depends on the 
environment and retention will be shorter in humid cli-
mates. The clock setting is not retained by the backup sys-
tem.

This unit contains a semiconductor laser system and is 
classified as a “CLASS 1 LASER PRODUCT.” So, to 
use this model properly, read this Instruction Manual 
carefully. In case of any trouble, please contact the store 
where you purchased the unit. To prevent exposure to 
the laser beam, do not try to open the enclosure.

VISIBLE AND INVISIBLE LASER RADIATION 
WHEN OPEN AND INTERLOCK FAILED OR 
DEFEATED. DO NOT STARE INTO BEAM.

THIS PRODUCT UTILIZES A LASER. USE OF 
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE 
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.

This label is located on the side of the unit. It indicates 
that:
1. This unit is a CLASS 1 LASER PRODUCT and 

employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not 

remove the cover. Refer servicing to qualified per-
sonnel.

Declaration  of  Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH
LIEGNITZERSTRASSE 6, 
82194 GROEBENZELL, 
GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product 
described in this instruction manual is in compliance with the 
corresponding  technical standards such as EN60065, 
EN55013, EN55020 and EN61000-3-2, -3-3.