ONKYO C-N7050 Manuale Utente

Follow these procedures to input characters when using 
the NET Setting and My Favorites menus, for example.
1.  Use the remote control direction ( / / / ) buttons to 

select a character or symbol and press the ENTER 
button.
Repeat this procedure to input more

2.  After completing input, use the remote control 

direction ( / / / ) buttons to select “OK” and press 
the ENTER button.
If this is not done, the input characters will not be 
saved.
The following characters can be used.

Space: This inputs a blank space that is one-
character wide.

Shift*: This changes the characters shown.

 (left)/ 

 (right)

Use these to move the cursor in the text input area.

BS (backspace)**: Delete characters to the left of the 
cursor. Move the cursor left.

OK: Select when input complete.

*  You can also change them by pressing the >10 

button.

** You can press the CLEAR button to delete all 

the input characters at once.

Update the firmware via network or USB connection.

Download the latest firmware
Visit the Onkyo website to download the latest firmware. 
(If no firmware is listed, no firmware update is available.)
See "Update" for how to check the firmware version.

Use the network connection on the rear panel to update 
the firmware.

 

⿠ Make sure that this unit is turned on and the Ethernet 

cable is connected to the rear panel of this unit.

 

⿠ While updating, never disconnect or turn off this unit.

 

⿠ While updating, never disconnect and reconnect the 

Ethernet cable.

 

⿠ While updating, never disconnect and reconnect the 

power cord.

 

⿠ Do not access this unit from a computer while 

updating.

 

⿠ Updating takes about five minutes to be completed.

 

⿠ Settings you made are retained after updating.

 

⿠ Before starting an update, check the 

network connection.

 

⿠ Stop any playing Internet radio, iPod/

iPhone, USB flash drive or server.

1.  Press the MENU button and press the direction ( / ) 

buttons to select "Update".

2.  Press the ENTER button.

 

⿠ Wait for a while if "Not Available" is displayed and 

"Update" cannot be selected.

3.  Press the direction ( / ) buttons to select "CN via 

NET" and press the ENTER button.

 

⿠ The option does not appear when no firmware 

update is available.

4.  Select "UpdateStart" and press the ENTER button.

 

⿠ Updating starts.

5.  "Completed" appears on the unit's display when 

updating is completed.

6.  Press the ON/STANDBY button on the front panel to 

put the unit into standby.

 

⿠ Do not use the remote control at this time. If you 

do nothing for three minutes, the unit will enter 
standby automatically.