Faber M1600 Manuale Utente

Genie Monochrome Series Overview  •  9 

EN55022, class A,  Radio Disturbance Characteristics 
EN61000-4-2, 

Electrostatic discharge immunity test 

EN61000-4-3, Radiated, 

radio-frequency, 

electromagnetic field immunity test 

EN61000-4-4, 

Electrical fast transient/burst immunity test 

EN61000-4-6, 

Immunity to conducted disturbances, induced by radio-frequency fields 

Part 15, class A  

see 

" on page 100 

 

Compliancy as per European directive 2002/95/EC  
(applies to camera part numbers CR-GENx-xxxxx) 

 

 

 

Genie cameras are 100% compliant with the GigE Vision 1.0 
specification which defines the communication interface protocol 
used by any GigE Vision device.  For more information see:  

 

 

Genie cameras implement a superset of the GenICam™ 
specification which defines device capabilities. This description 
takes the form of an XML device description file respecting the 
syntax defined by the GenApi module of the GenICam™ 
specification. For more information see 

 
 

Each sensor description below provides a specification table and response graphic. The graph describes the sensor 
response to different wavelengths of light (excluding lens and light source characteristics). Visible light spans 
wavelengths between about 390 - 780 nanometers. Wavelengths below 390 nm are termed ultra-violet while those 
above 780 nm. are termed infra-red. The peak response is around 500 nanometers typical for each sensor model, 
corresponding to a shade of blue-green.