Sanyo VCC-N6584 Manuale Utente
11
About the “
Internet connection”
Port forwarding settings will need to be carried out for the image port (HTTP/UDP) of the broadband
router.
router.
Port 1: JPEG
/H.264 HTTP
Port 2: H.264 UDP Unicast
If UDP port forwarding has been set when viewing H.264 movie images over the Internet, the transfer
can take place using the UDP protocol. However, it depends on the network environment, so ask your
network administrator.
For details on how to set port forwarding, please refer to your router’s Instruction manual.
can take place using the UDP protocol. However, it depends on the network environment, so ask your
network administrator.
For details on how to set port forwarding, please refer to your router’s Instruction manual.
MEMO:
When setting multiple cameras, use the network operations to set the port numbers for ports 1 and 2 to
numbers which are different from the first camera.
When setting multiple cameras, use the network operations to set the port numbers for ports 1 and 2 to
numbers which are different from the first camera.
Port 1: [NETWORK]
→ “PORT NUMBER”
Port 2: [CODEC/STREAMING]
→ “UDP (Unicast) PORT”
■
x
x
•
•
•
•
•
Port number: Initial value 80 (TCP)
IP address: Initial value 192.168.0.2
IP address: Initial value 192.168.0.2
Port number: Initial value 80 (TCP)
• Set to match the LAN
• Set to match the LAN
Router
To LAN port
To WAN port
Port number: Initial value 3939 (UDP)
IP address: Initial value 192.168.0.2
IP address: Initial value 192.168.0.2
Port number: Initial value 3939 (UDP)
• Set to match the LAN
• Set to match the LAN
Router
To LAN port
To WAN port
Viewing Live Images on a Computer
(Network Connection)
L5CW2_XE_US.indd Sec1:11
2008/09/17 13:59:48