Samsung SCC-B2313 Dépliant
SCC-B2313/B2315
SCC-B2013P/B2015P
1/3" High Resolution WDR Color Camera
Features
Dimensions (unit:mm)
• 1/3" Super HAD Progressive CCD
• Day & Night (Moving filter)
• Horizontal resolution : 540(color)/570(B/W) TV Lines
• DNR (Digital Noise Reduction)
• Minimum scene illumination : 0.0005(color)/0.00005(B/W) Lux
• WDR (Wide Dynamic Range) - (SCC-B2313/B2013P is not available)
• 24ea Privacy Zones
• Motion Detection
• 2
X
D-Zoom
• OSD (On Screen Display)
• RS485 remote control
• AC24V / DC12V (B2013/B2015P : AC220V only)
Specifications
Summary
The SCC-B2313/B2315 is a high resolution color camera equipped with
1/3" Super HAD Progressive scan CCD which delivers excellent Wide
Dynamic Range. It produces sharp images even in harsh lighting condi-
tions that have large contrasts between lightness and darkness.
Imaging Device
1/3" Super-HAD PS CCD, 410K(PAL:470K) pixles
Effective Pixels
NTSC : 768(H)x494(V) / PAL : 752(H)x582(V)
Scanning Method
2:1 Interlace
Scanning
Horizontal
NTSC : 15.750Hz / PAL : 15.625Hz
Line Frequency
Vertical
NTSC : 60Hz / PAL : 50Hz
Synchronization Method
Internal / Line lock (V PHASE control)
Horizontal Color
540 TV Lines
Resolution
B/W
570 TV Lines
Signal Output
VBS 1.0Vp-p(75 ohm, composite)
S/N Ratio
S/N Ratio
50dB
Mount Type
C/CS Mount Compatible
Minimum Scene Color
0.0005(Sens up 256X,15IRE)Lux
Illumination
B/W
0.00005(Sens up 256X,15IRE)Lux
Functions
Privacy Zone
Off/On(24EA)
Day & Night
DAY/NIGHT/AUTO/EXT
Motion Detection Off/On(4EA)
Wide Dynamic Range No
Wide Dynamic Range No
Yes
D-Zoom
Off ~ 2X
High Speed Shutter Off ~ 1/10K sec
Sens Up
Sens Up
Off ~ 256X
BLC
Off/On(Area setting)
AGC
Off/Low/High
ELC
Off/On(Max.1/100K sec)
Line lock
Off/On
Camera ID
Off/On
White Balance
ATW1/ATW2/AWC/MANUAL
OSD
Yes
Alarm Output
Yes(1EA)
Remote Control
RS485(Half)
Operating Temperature
-10°C ~ 50°C
Operating Humidity
Within 90% RH
Power Requirment
AC24V / DC12V compatible
Power Consumption
3.5W
Weight
410g
Dimensions
68(W) x 55(H) x 128.7(D)mm
Model
SCC-B2313
SCC-B2315
19
NEW PRODUCTS_CAMERAS
Video Security System
Specifications
NEW PRODUCTS
CAMERAS
MONITORS
DVRS
NETWORK SECURITY
CONTROLLERS
Imaging Device
1/3" Super HAD CCD, 410K(PAL:470K) pixels
Effective Pixels
NTSC : 768(H)x494(V) / PAL : 752(H)x582(V)
Scanning Method
2:1 Interlace
Scanning Line
Horizontal
NTSC : 15.750Hz / PAL : 15.625Hz
Frequency
Vertical
NTSC : 60Hz / PAL : 50Hz
Synchronization Method
Internal / Line lock
Horizontal Resolution
540 TV Lines
Signal Output
VBS 1.0Vp-p(75 ohm, Composite)
S/N Ratio
50dB
Minimum Scene Illumination
0.0009(Sens up 128X,15IRE)Lux
Control Switch
Day & Night
Off/On
White Balance
ATW/AWC
ALC / ELC
ALC(Video/DC) / ELC(~1/120Ksec)
Flickerless
Off/On
Line lock
Off/On (V-Phase Regulation)
Input/Output
Image Output
BNC
AI Lens
4-pin DIN
Power
Terminal Block (2-pin)
Operating Temperature
-10°C ~ +50°C
Operating Humidity
Maximum 90% RH
Power Requirment
AC24V / DC12V compatible
Power Consumption
3W
Weight
440g
Dimensions
68(W) x 55(H) x 138(D)mm
Model
SCC-B2311
18
NEW PRODUCTS_CAMERAS
Video Security System
Dimensions (unit:mm)
Rear
1. Power Connection Terminal : This is the terminal where a power (adaptor) cable is
connected.
Connect either AC24V or DC12V for power Requirment.
Connect either AC24V or DC12V for power Requirment.
2. Power LED : The LED light is turned on if power is being supplied normally to the camera.
3. Vertical Synchronization Phase Control Switch (left)
3. Vertical Synchronization Phase Control Switch (left)
: Used when adjusting the vertical synchronization phase.
4. Vertical Synchronization Phase Control Switch (right)
: Used when adjusting the vertical synchronization phase.
5. Function Switch-1
· SW1(L/L) : If set to ‘OFF,’ the camera operates in internal
synchronization mode and if set to ‘ON,’ it operates
in power synchronization mode.
in power synchronization mode.
· SW2(ELC) : If this switch, selected when using a manual iris
lens, is switched on, the electronic shutter speed is automatically controlled
according to screen brightness, in a range of 1/60~1/120,000 exposures
per second.
according to screen brightness, in a range of 1/60~1/120,000 exposures
per second.
· SW3(FL) : This switch triggers the screen–flicker-prevention function in the 50Hz power
range, preventing the screen flicker that can result from the dissonance of
vertical synchronization frequency and blink frequency.
vertical synchronization frequency and blink frequency.
· SW4(LSS): This switch triggers the enhanced sensitivity mode, which eliminates image
noise by consistently accumulating image fields in the memory when images
are captured in a dark place, and by increasing the brightness and contrast ratio.
are captured in a dark place, and by increasing the brightness and contrast ratio.
6. Function switch-2
· SW1(AGC) : This switch is used to turn the camera AGC (Auto
Gain Control) ON/OFF.
· SW2(DNR) : This switch triggers the random noise reduction
function.
· SW3(D&N) : This refers to the Day & Night.
· SW4(AWB) : If this switch is set to ON, the screen color is automatically adjusted according
· SW4(AWB) : If this switch is set to ON, the screen color is automatically adjusted according
to the temperature change of the lighting color due to changes in the external
environment.
environment.
7. DC IRIS Level Regulator : When the ALC lens selection switch is set to DC, it regulates
the iris level by using a control lever.
8. Video Output Terminal : The video signal of the camera can be outputted through this
terminal to the video input terminal of a monitor.
1. Mount Adaptor Installation Holes : When installing a camera to a bracket, these are
used when fastening the mount adaptor to the
bracket with screws.
bracket with screws.
2. Auto Iris Lens (optional) : This is the lens that can be installed onto a camera.
3. Auto Iris Lens Connector : The power, control signal, video signal and DC signal needed
3. Auto Iris Lens Connector : The power, control signal, video signal and DC signal needed
to control the lens iris are provided to the auto iris lens.
4. Flange Back Control Ring : This is used for controlling the back focus of camera.
5. ALC Lens Selection Switch : This is the switch for selecting the type of lens installed
5. ALC Lens Selection Switch : This is the switch for selecting the type of lens installed
onto the camera.
6. Control Cable for the Auto Iris Lens : This transmits the control signal sent by the
camera to control the lens iris.
7. DC IRIS Level Regulator
6. Function Switch-2
2. Power LED
8. Image Output Port
4. Vertical Synchronization
Phase Control Switch (right)
Phase Control Switch (right)
1. Power Connection Terminal
3. Vertical Synchronization
Phase Control Switch (left)
Phase Control Switch (left)
5. Function Switch-1
Exterior
3. Auto Iris Lens
Connector
1. Mount Adaptor
Installation Holes
4. Flange Back
Control Ring
2. Auto Iris Lens
6. Control Cable for the
Auto Iris Lens
5. ALC Lens Selection
Switch
ON
1. L/L
2. ELC
3. FL
4. LSS
2. ELC
3. FL
4. LSS
SW1 SW2 SW3 SW4
ON
1. AGC
2. DNR
3. D&N
4. AWB
2. DNR
3. D&N
4. AWB
SW1 SW2 SW3 SW4
* SCC-B2011P is same as SCC-B2311 except for Power Requirment (AC 220V~240V)
* SCC-B2013P is same as SCC-B2313 except for Power Requirment (AC 220V~240V)
SCC-B2015P is same as SCC-B2315 except for Power Requirment (AC 220V~240V)
SCC-B2311
SCC-B2011P
SCC-B2313/B2315
SCC-B2013P/B2015P