Lucent Technologies 8.2 Manuale Utente

Issue 1

April 2000

Features and technical reference 

1306

Class of Restriction 

You can use termination restrictions to prohibit users from receiving any calls. 
These users can still originate calls. DID or Advanced Private-Line Termination 
calls route to a recorded announcement or the attendant.

Fully restricted service prevents specific users from making or receiving 
public-network calls. Fully-restricted users cannot use authorization codes to 
deactivate this feature.

Calls from the public network to a fully-restricted extension redirect to intercept 
treatment or to the attendant. If the call redirects to the attendant, the attendant’s 
display indicates the call was redirected because of fully restricted service 
(FULL).

There are circumstances where an extension with fully restricted service can 
access or be accessed by the public network. 

You can use miscellaneous terminal restrictions to prohibit users from accessing 
other specific terminals. Restricted calls are routed to intercept tone. 
Miscellaneous restriction groups apply on a per-COR basis. However, you can 
assign the same COR to more than one facility. Facilities with the same COR may 
be like facilities (such as two telephones) or different facilities (such as a 
telephone and a trunk group)

You can use miscellaneous trunk restrictions to prohibit users from accessing 
specific trunk groups, such as WATS or CO trunk groups. Any or all trunk groups 
can be in a miscellaneous-trunk-restriction group. Restricted calls are routed to 
intercept tone.

Toll restrictions prevent users from placing public-network calls to certain toll-call 
numbers. Toll restriction is not a COR; you assign Toll restrictions to outgoing 
trunk groups on the Trunk Group form. You disable TAC-toll restrictions for 
specific outgoing trunk groups on the Trunk Group form.