Lucent Technologies 8.2 Manuale Utente
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
765
ISDN trunk group
17
Incoming Call Handling Treatment Table entries with a predefined service/feature
always appear before entries with a user-defined service/feature. To control the
order in which certain entries appear, you must use user-defined services/features
for those entries. For example, you can redefine the predefined mega800
service/feature as an identical user-defined entry with the name m800.
always appear before entries with a user-defined service/feature. To control the
order in which certain entries appear, you must use user-defined services/features
for those entries. For example, you can redefine the predefined mega800
service/feature as an identical user-defined entry with the name m800.
User-defined entries are always listed in the reverse order compared to the way
they appear on the ISDN Network-Facilities screen. See
they appear on the ISDN Network-Facilities screen. See
‘‘Packet Gateway Board’’
on page 846
. Thus, given two user-defined services/features ABC and XYZ, you
can force XYZ to appear before ABC in an Incoming Call Handling Treatment
Table by putting XYZ after ABC on the Network-Facilities screen.
Table by putting XYZ after ABC on the Network-Facilities screen.
NOTE:
DCS features that use the remote-tgs button (on the remote switch) do not
work when the local trunk group deletes or inserts digits on the incoming
call. These buttons try to dial a local TAC. Adding or deleting digits defeats
this operation and renders the remote feature inoperable. If digit
manipulation is needed, use it on the outgoing side, based on the routing
pattern. One reason for digit manipulation is insertion of the AAR feature
access code (FAC).
work when the local trunk group deletes or inserts digits on the incoming
call. These buttons try to dial a local TAC. Adding or deleting digits defeats
this operation and renders the remote feature inoperable. If digit
manipulation is needed, use it on the outgoing side, based on the routing
pattern. One reason for digit manipulation is insertion of the AAR feature
access code (FAC).
These fields are located on the Incoming Call Handling Treatment Table screen.
Service/Feature
Specifies the ISDN Services/Features for an incoming call type. See the Service
Type field description for a list of predefined Services/Features that can be
received. Or, use Type 0, Type 1, and Type 2 user defined services. The identifier
other can be used for any Services/Features not explicitly specified.
Type field description for a list of predefined Services/Features that can be
received. Or, use Type 0, Type 1, and Type 2 user defined services. The identifier
other can be used for any Services/Features not explicitly specified.
Called Len
Specifies the number of digits received for an incoming call. A blank entry is used
as a “wild card” entry and, when used, means that any length of digits associated
with the specified Service/Feature can match in this field. Valid entries are
as a “wild card” entry and, when used, means that any length of digits associated
with the specified Service/Feature can match in this field. Valid entries are
0
to
21
,
or leave blank.
Called Number
Specifies the leading digits received for an incoming call. A blank entry is used as
a “wild card” entry and, when used, means that any number associated with the
specified Service/Feature can match in this field. Valid entries are
a “wild card” entry and, when used, means that any number associated with the
specified Service/Feature can match in this field. Valid entries are
1
to
16
, or leave
blank.