Toshiba IK-WR01A Manuale Utente
8
Installation/Set up
V
iewing
and Operation
Recording
Setting up
Others
●
Connect the cable of the camera and the cable from the designated power supply with
respective connectors.
respective connectors.
●
Screws for securing the camera and mounting base to the ceiling or wall are not supplied
with the unit. Use appropriate screws.
with the unit. Use appropriate screws.
NOTE
• The weight (camera body only) is about 3.3 lbs. The camera unit including the mounting
base and the bracket weighs 5 lbs.
Adjust the Angle of View
a
Top Cover
Security screws
Camera Base
Loosen the three security screws by the supplied
special hexangular wrench and remove the top cover.
special hexangular wrench and remove the top cover.
Important Notice :
Be sure to remove three transportation screws(a).
These screws are used only for transportation and must NOT be used for installation.
The hexangular wrench will be used for next step. Please be careful not to lose it.
Be sure to remove three transportation screws(a).
These screws are used only for transportation and must NOT be used for installation.
The hexangular wrench will be used for next step. Please be careful not to lose it.
INSTALLATION