Lucent Technologies Release 6 Manuale Utente
Test the System
Page 4-1
4
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
4
4
Test the System
The following tests provide verification of the TDM bus cables and terminators,
and fiber optic inter-cabinet cables. If a FAIL result code is seen or other
problems are indicated, check these cables. If problems continue, refer to
and fiber optic inter-cabinet cables. If a FAIL result code is seen or other
problems are indicated, check these cables. If problems continue, refer to
DEFINITY Enterprise Communications Server Release 6 Maintenance for R6r
or
DEFINITY Enterprise Communications Server Release 6 Maintenance for R6vs/si
.
NOTE:
‘‘LED Indicators’’ on page 4-13
for information regarding the LED
status indicators for the different circuit packs.
1. The status of the system should be reviewed first.
2. Test the tone-clock, TDM bus, and duplication link in the PPN.
3. Test the Switch Node carrier (Release 6r only).
4. Test Expansion Interface circuit packs, tone-clock circuit packs, TDM
buses, and duplication in the EPNs.
Circuit pack positions are usually given by cabinet, carrier, and slot. They may
also be given by port.
also be given by port.
The term “
cabinet”
refers to 1 Multi-Carrier Cabinet making up 1 port network. A
port network is defined as a group of cabinets connected together with one TDM
bus.
bus.