Lucent Technologies Release 6 Manuale Utente
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-105
Add External Modem to TN1648B
5
10. Connect the cable to the front of the TN1648B circuit pack as shown in
Figure 5-52
.
NOTE:
Dress the cable straight down the front of the circuit pack. Do not
allow the cable to cross in front of another circuit pack.
allow the cable to cross in front of another circuit pack.
Figure 5-52.
Connect the Cable to the Circuit Pack
11. Close the front door.
12. Discard the pass-thru tool.
Test the Installation
1. Login to the management terminal.
2. Administer the system by referring to the
Installation and Test for Adjuncts
and Peripherals, 555-230-125
.
3. Enter list configuration all to determine if the new circuit pack appears in
the correct slot and that there are no circuit pack conflicts.
prda0007 RPY 021698