Q-See DPQS001E Manuale Utente

1. Plug the VGA cable into the port marked “VGA” on the back of the 

DVR.

2. Plug the other end of the VGA cable into the similar port on the back 

of the monitor.

3. Plug the monitor’s power cable into the surge protector.

 

Connect the BNC-to-RCA cable to the “Video Out” port on

the back of the DVR.

 

Plug the RCA end into the “Video In” port on the television.

 

Plug the television’s power cable into a surge protector.

  If you do not see an image after powering on your DVR, check 

the Input setting on the TV.

1. Plug an HDMI cable into the “HDMI” port on the back of the DVR.
2. Plug the other end into the “HDMI” port on the television.
3. Plug the television’s power cable into a surge protector.

 If you do not see an image, check the Imput setting on the TV.

1. Connect the power cable to the DVR. 
2. Connect the power adapter to the power cable.

3a. Plug the power cable into a surge protector

   b. If your model has a power switch on the rear panel, use it to turn on the DVR.

3a

3b

3a

3b

Plug the mouse into the port labled “USB” on the rear
of the DVR.

You will hear a beep as 
the DVR powers up.