VIVOTEK SD7151 Manuale Utente

This chapter explains how to remotely control the Network Camera with a USB joystick 
(optional). It is easy to install and configure using USB interface. 

Connect the USB plug of the joystick to a USB port on your computer. Supported by the plug-
in in the main page (Microsoft’s DirectX), once the plug-in in the main page is loaded, it will 
automaticlly detect if there is any joystick on the computer. The joystick should work properly 
without installing any other driver or software.

The joystick will automatically appear in the Game Controllers list in the Windows Control Panel 
on your computer. If you want to check out your device, go to the following page: Open Start > 
Control Panel > Game Controllers

In addition to using the control panel or clicking on the live view window, you can also control the 
rotate handle of the joystick to remotely control a pan/tilt/zoom Network camera with ease.

Pan/Tilt: Move the rotating handle of the joystick left/right (horizontal), you can pan the camera to the 
desired positions. Move the rotating handle of the joystick forwards/backwards (vertical), you can tilt 
the camera to the desired positions. There will be a green line that displays the moving direction on the 
center of the video image as the diagram 1 below.

Zoom in/Zoom out: Turn the rotating handle clockwise to zoom the camera in on an image and counter- 
clockwise to zoom the camera out from an image. There will be a circle and four vectors on the center of 
the video image as the diagram 2, 3 below.

T

T

P

T