VIVOTEK 65HP Manuale Utente

 

 

►The Preset Positions will also be displayed on the home page. Select one from the Go to drop-down  

If you select “Mechanical“, the RS485 Settings section will be displayed as shown below:

Disable: Select this option to disable this function.

PTZ camera: Select this option to enable PTZ operation. 

To utilize this feature, please connect the Network Camera to a PTZ driver or scanner via RS485 serial 

interface first. Then you can configure the PTZ driver and RS485 port with the following settings.

VIVOTEK provides five PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00, Pelco D, Pelco P, and 

Samsung Scc643 protocol� If none of the above PTZ drivers is supported by your PTZ scanner, please 

select 

Custom camera (scanner)� Please refer to the documentation of your PTZ scanner to determine 

the Camera ID, PTZ driver, and Port settings� The Camera ID is necessary to control multiple cameras� 

If you click 

Save to enable this function, the camera control panel will be displayed on the main page� 

Please refer to the illustration on page 80�