VIVOTEK IP8162 Manuale Utente

 

 

Digital input: Select High or Low to define normal status for the digital input. The Network Camera will 

report the current status�

Digital output: Select Grounded or Open to define normal status for the digital output. The Network 

Camera will show whether the trigger is activated or not�

This section explains how to set up camera tamper detection� With tamper detection, the 
camera is capable of detecting incidents such as

 redirection, blocking or defocusing, or even 

spray paint�

Please follow the steps below to set up the camera tamper detection function:

1� Check 

Enable camera tampering detection�

2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the  

    tampering factor (the difference between current frame and pre-saved background) exceeds the 

    trigger threshold�

3� Set up the event source as Camera Tampering Detection on 

Event > Event settings > Trigger. 

    Please refer to page 108 for detailed information�

Advanced Mode