JVC TK-T2101RU Manuale Utente
1
Important Safety Information
Warning and Operating Notes
Installation and serving the camera should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your warranty.
experienced technicians to conform to all local codes and to maintain your warranty.
WARNING!
The use of CSA certified/ UL Listed Class 2 power adapters
are required to ensure compliance.
Note:
This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked
“Class 2” or Listed Adapter marked “L.P.S.” (or “Limited Power Source”) and rated
output DC 12V, 0.415A minimum or AC 24V, 60Hz, 0.415A minimum.
WARNING!
To reduce the risk of fire or electric shock, do not expose the
product to rain or moisture.
Operating Notes
Power
Supply: This dome camera can operate on AC 24V or DC 12V.
Operating Conditions
• Avoid viewing very bright objects (example, light fixtures) for extended periods.
• Avoid operating or storing the unit in the following locations:
- Extremely humid, dusty, hot, cold environments (where the operating
temperature is outside the recommended range of 14°F to 122°F [-10°C to
+50°C].)
+50°C].)
- Close to sources of powerful radio or TV transmitters
- Close to fluorescent lamps or objects reflecting light
- Under unstable light sources (may cause flickering)
Note
(for USA)
Note
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum
of wiring to be used.
Caution
Connect only one camera to the power line, AC24V/DC12V.Do
not share the power line with other equipment. The power
cable between power source and the camera must be under 3 m.
Connect only one camera to the power line, AC24V/DC12V.
Do not share the power line with other equipment. The
power cable between power source and the camera must
be under 3 m.
Class
Class 2 shall be marked adjacent to
the field wiring terminals.