VIVOTEK H.264 Manuale Utente

 

 

This section explains how to configure the video settings of the Network Camera.

Video title: Enter a name that will be displayed on the title bar of the live video�

Color: Select to display color or black/white video streams�

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image 

flickering associated with fluorescent lights� Note that after the power line frequency is changed, you 

must disconnect and reconnect the power cord of the Network Camera in order for the new setting to 

take effect�

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display 

of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling) 

to correct the image orientation.  Please note that the preset locations will be cleared after flip/mirror.

Maximum Exposure Time: Select a proper maximum exposure time according to the light source of 

the surroundings. Shorter exposure times result in less light. The exposure times are selectable for the 

following durations: 1/30 second, 1/15 second, and 1/5 second� 

Overlay title and time stamp on video: Select this option to place the video title and time on the video 

streams�

Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be 

stamped on the video streams�

Video Title

Title and Time

Video 13:44:17  2011/05/13

2011/05/13 13:44:17