American Dynamics ADCPWMCRNR Dépliant

Locate the corner mount in the required position. Use screws and wall plugs 
(as appropriate to the wall surfaces) to fix the corner mount on the wall. 
Access to the screw positions is gained through the open front aperture of 
the corner mount. 

Install the dome camera on the corner mount by first arranging the cables.

Fit and tighten the dome camera on the coner mount by rotating clockwise.

Installation Completed.

Note: The securing hole should be on the bottom side of the corner mount 
(as picture shown above).

Cover the dome camera with the corner mount lid. Insert and tighten the securing 
screw to fix the lid to the corner mount. Insert the white screw cover to complete the 
installation.

Securing Hole

Corner Mount

Securing Screws

Securing

Screws

Power Input 

Connector

Video Connector

Corner Mount Lid

Securing Screw

Cable Entry

Dome Camera

E

• Corner Mount  x 1
• Corner Mount Lid x 1
• Screw Pack x 1

Please visit our website for more information: 
www.americandynamics.net
© 2007 Sensormatic Electronics Corporation.
Product specifications subject to change without notice. Certain product 
names mentioned herein may be trade names and/or registered trademarks 
of other companies.

8200-0865-01 Rev A

The ADCPWMCRNR Corner Mount is designed for use with all Discover 
Indoor Mini-Domes.

Note: The lid is designed so that when placed on the base it has some free 
movement to try and compensate for un-even walls. 

Screw Cover