American Dynamics ADCTDN0230P Manuale Utente
12
Front/Bottom/Side panel
A
Back focus adjustment ring
This ring switches between back focus adjustment and lens mounting method.
When adjustment is required, loosen the back focus locking screw J by
turning it anti-clockwise. After the adjustment, tighten the locking screw by
turning it clockwise. This camera is factory-adjusted to a suitable position with
CS-mount lens. (
When adjustment is required, loosen the back focus locking screw J by
turning it anti-clockwise. After the adjustment, tighten the locking screw by
turning it clockwise. This camera is factory-adjusted to a suitable position with
CS-mount lens. (
B
Lens Mount
C
Camera-mounting bracket fixing screws (x2: M2.6 x 6 mm)
Be sure to use a 6 mm long screw.
Note:
● Do not use a screw that is longer than the specified length. It may damage
the internal parts.
Name of Parts and their Functions
IRIS
VIDEO
DC
LEVEL
B
G
H
C
J
A
I
D
F
E
ADCTDN2412N_P_EN.book Page 12 Friday, September 28, 2007 12:49 PM