American Dynamics ADCTDN0230P Manuale Utente
37
Item
Functions and settings
This sets the polarity of the AUX input signal.
MAKE
MAKE
: When the contact between all alarm input
terminals and GND terminals changes from
open to close, the alarm will activate.
open to close, the alarm will activate.
: When the contact between all alarm input
terminals and GND terminals changes from
close to open, the alarm will activate.
close to open, the alarm will activate.
[Default setting: MAKE]
Memo:
will be displayed and settings is disabled.
Item
Functions and settings
This item sets the title to be displayed permanently on
the lower part of screen. A maximum of 24 characters
can be set for the title.
ACamera title settingB (A Pg. 48)
the lower part of screen. A maximum of 24 characters
can be set for the title.
ACamera title settingB (A Pg. 48)
Select ATW or ATW wide for auto tracking white balance
that respond to scene lighting changes. Select AWC
when white balance is fixed and does not respond to
scene lighting changes.
that respond to scene lighting changes. Select AWC
when white balance is fixed and does not respond to
scene lighting changes.
Memo:
● In B&W mode, A- - -B will be displayed and settings is
disabled.
[Default: ATW]
This is the Auto-Tracking White Balance mode.
(Automatic color temperature tracking.) The camera
adjusts the white balance automatically according to the
color temperature of the illumination.
(Automatic color temperature tracking.) The camera
adjusts the white balance automatically according to the
color temperature of the illumination.
This mode supports an even wider range of color
temperature than ATW. Use this mode when white
balance cannot be achieved using ATW mode.
temperature than ATW. Use this mode when white
balance cannot be achieved using ATW mode.
ADCTDN2412N_P_EN.book Page 37 Friday, September 28, 2007 12:49 PM