Barco R59116700-01 Manuale Utente
First use
11
2
First use
2.1
Starting up the system
This paragraph guides you through the basic steps to start up the ECU-100 server and the
application and to bring the first inputs on the Display Wall:
2.2
Connect the components
2.2.1
Getting started (cabling and connections)
Figure 1: USB input location
•
Connect the USB Keyboard and Mouse into vacant USB connectors located on the rear
side of the unit.
side of the unit.
Figure 2: Power connector location
•
Connect both Power Cables to the chassis. Failure to connect both power cables will
result in an audible alarm being sounded when the system is switched on.
result in an audible alarm being sounded when the system is switched on.
S2
USB Input connectors
P1
Power Connectors